dmesg - mdadm raid10 2
Linux version 4.11.4-041104-generic (kernel@tangerine) (gcc version 6.3.0 20170519 (Ubuntu/Linaro 6.3.0-18ubuntu2) ) #201706071003 SMP Wed Jun 7 14:05:58 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000d52cdfff] usable
BIOS-e820: [mem 0x00000000d52ce000-0x00000000d52e6fff] ACPI data
BIOS-e820: [mem 0x00000000d52e7000-0x00000000d5368fff] reserved
BIOS-e820: [mem 0x00000000d5369000-0x00000000daa85fff] usable
BIOS-e820: [mem 0x00000000daa86000-0x00000000dabfdfff] reserved
BIOS-e820: [mem 0x00000000dabfe000-0x00000000dac06fff] ACPI data
BIOS-e820: [mem 0x00000000dac07000-0x00000000dad0cfff] usable
BIOS-e820: [mem 0x00000000dad0d000-0x00000000db0cbfff] ACPI NVS
BIOS-e820: [mem 0x00000000db0cc000-0x00000000dbe58fff] reserved
BIOS-e820: [mem 0x00000000dbe59000-0x00000000ddffffff] usable
BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0604 04/06/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x81f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 3552M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
e820: update [mem 0xde000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff925f00097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x43300b000, 0x43300bfff] PGTABLE
BRK [0x43300c000, 0x43300cfff] PGTABLE
BRK [0x43300d000, 0x43300dfff] PGTABLE
BRK [0x43300e000, 0x43300efff] PGTABLE
BRK [0x43300f000, 0x43300ffff] PGTABLE
BRK [0x433010000, 0x433010fff] PGTABLE
BRK [0x433011000, 0x433011fff] PGTABLE
BRK [0x433012000, 0x433012fff] PGTABLE
BRK [0x433013000, 0x433013fff] PGTABLE
BRK [0x433014000, 0x433014fff] PGTABLE
BRK [0x433015000, 0x433015fff] PGTABLE
BRK [0x433016000, 0x433016fff] PGTABLE
RAMDISK: [mem 0x323da000-0x351e4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D52CE098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D52D74C0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
ACPI: DSDT 0x00000000D52CE1E0 0092DF (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DB0C9C80 000040
ACPI: APIC 0x00000000D52D75D8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D52D76B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D52E5078 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: SSDT 0x00000000D52D7758 008C4C (v02 00000002 MSFT 04000000)
ACPI: FIDT 0x00000000D52E03A8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D52E0448 0020E4 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SRAT 0x00000000D52E2530 000130 (v03 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000D52E2660 000F50 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000D52E35B0 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000D52E35E0 0017E1 (v01 AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000D52E4DC8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000D52E4E08 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000D52E4E40 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000D52E4E68 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000D52E4EB0 0000D0 (v02 00000001 AMD 00000000)
ACPI: SSDT 0x00000000D52E4F80 0000F8 (v01 00001000 INTL 20120913)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
NODE_DATA(0) allocated [mem 0x81f355000-0x81f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x00000000d52cdfff]
node 0: [mem 0x00000000d5369000-0x00000000daa85fff]
node 0: [mem 0x00000000dac07000-0x00000000dad0cfff]
node 0: [mem 0x00000000dbe59000-0x00000000ddffffff]
node 0: [mem 0x0000000100000000-0x000000081f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
On node 0 totalpages: 8371380
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14055 pages used for memmap
DMA32 zone: 899480 pages, LIFO batch:31
Normal zone: 116686 pages used for memmap
Normal zone: 7467904 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0xd52ce000-0xd52e6fff]
PM: Registered nosave memory: [mem 0xd52e7000-0xd5368fff]
PM: Registered nosave memory: [mem 0xdaa86000-0xdabfdfff]
PM: Registered nosave memory: [mem 0xdabfe000-0xdac06fff]
PM: Registered nosave memory: [mem 0xdad0d000-0xdb0cbfff]
PM: Registered nosave memory: [mem 0xdb0cc000-0xdbe58fff]
PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ffff9266fe600000 s115608 r8192 d31848 u262144
pcpu-alloc: s115608 r8192 d31848 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8240554
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 32824800K/33485520K available (9080K kernel code, 1697K rwdata, 3916K rodata, 2212K init, 2232K bss, 660720K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:524544 nr_irqs:1096 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2994.360 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5988.72 BogoMIPS (lpj=11977440)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34298 entries in 134 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (95523.18 BogoMIPS)
sched_clock: Marking stable (684000000, 0)->(825375046, -141375046)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdad0d000-0xdb0cbfff] (3928064 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:29:54, date: 06/29/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI Error: Needed [Integer/String/Buffer], found [Region] ffff9266fe0ef120 (20170119/exresop-424)
ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170119/nsinit-412)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: System wakeup disabled by ACPI
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe6a0000-0xfe6a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfe680000-0xfe69ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfe600000-0xfe67ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-27]
pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe400000-0xfe6fffff]
pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:00.0: PME# supported from D3hot D3cold
pci 0000:1d:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:02.0: PME# supported from D3hot D3cold
pci 0000:1d:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:03.0: PME# supported from D3hot D3cold
pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:04.0: PME# supported from D3hot D3cold
pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:06.0: PME# supported from D3hot D3cold
pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:07.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 1d-27]
pci 0000:03:00.2: bridge window [io 0xe000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xfe400000-0xfe5fffff]
pci 0000:1d:00.0: PCI bridge to [bus 21]
pci 0000:1d:02.0: PCI bridge to [bus 23]
pci 0000:1d:03.0: PCI bridge to [bus 24]
pci 0000:25:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:25:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
pci 0000:25:00.0: PME# supported from D3hot D3cold
pci 0000:25:00.0: System wakeup disabled by ACPI
pci 0000:1d:04.0: PCI bridge to [bus 25]
pci 0000:1d:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:26:00.0: [8086:1539] type 00 class 0x020000
pci 0000:26:00.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
pci 0000:26:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:26:00.0: reg 0x1c: [mem 0xfe420000-0xfe423fff]
pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:00.0: System wakeup disabled by ACPI
pci 0000:1d:06.0: PCI bridge to [bus 26]
pci 0000:1d:06.0: bridge window [io 0xe000-0xefff]
pci 0000:1d:06.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:1d:07.0: PCI bridge to [bus 27]
pci 0000:28:00.0: [1002:6939] type 00 class 0x030000
pci 0000:28:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:28:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:28:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:28:00.0: reg 0x24: [mem 0xfe800000-0xfe83ffff]
pci 0000:28:00.0: reg 0x30: [mem 0xfe840000-0xfe85ffff pref]
pci 0000:28:00.0: supports D1 D2
pci 0000:28:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:28:00.0: System wakeup disabled by ACPI
pci 0000:28:00.1: [1002:aad8] type 00 class 0x040300
pci 0000:28:00.1: reg 0x10: [mem 0xfe860000-0xfe863fff 64bit]
pci 0000:28:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 28]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:29:00.0: [1022:145a] type 00 class 0x130000
pci 0000:29:00.2: [1022:1456] type 00 class 0x108000
pci 0000:29:00.2: reg 0x18: [mem 0xfe200000-0xfe2fffff]
pci 0000:29:00.2: reg 0x24: [mem 0xfe300000-0xfe301fff]
pci 0000:29:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:29:00.3: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit]
pci 0000:29:00.3: PME# supported from D0 D3hot D3cold
pci 0000:29:00.3: System wakeup disabled by ACPI
pci 0000:00:07.1: PCI bridge to [bus 29]
pci 0000:00:07.1: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:2a:00.0: [1022:1455] type 00 class 0x130000
pci 0000:2a:00.2: [1022:7901] type 00 class 0x010601
pci 0000:2a:00.2: reg 0x24: [mem 0xfe708000-0xfe708fff]
pci 0000:2a:00.2: PME# supported from D3hot D3cold
pci 0000:2a:00.3: [1022:1457] type 00 class 0x040300
pci 0000:2a:00.3: reg 0x10: [mem 0xfe700000-0xfe707fff]
pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 2a]
pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
pci 0000:28:00.0: vgaarb: setting as boot VGA device
pci 0000:28:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:28:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd52ce000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xdaa86000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdad0d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0300-0x030f] has been reserved
system 00:03: [io 0x0230-0x023f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:1d:02.0: bridge window [io 0x1000-0x0fff] to [bus 23] add_size 1000
pci 0000:1d:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 23] add_size 200000 add_align 100000
pci 0000:1d:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 23] add_size 200000 add_align 100000
pci 0000:1d:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 26] add_size 200000 add_align 100000
pci 0000:03:00.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1d-27] add_size 400000 add_align 100000
pci 0000:00:01.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-27] add_size 400000 add_align 100000
pci 0000:00:01.3: BAR 15: assigned [mem 0xf0200000-0xf05fffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.2: BAR 15: assigned [mem 0xf0200000-0xf05fffff 64bit pref]
pci 0000:1d:02.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:1d:02.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:1d:02.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:1d:06.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:1d:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:1d:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:1d:02.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:1d:02.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:1d:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:1d:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:1d:00.0: PCI bridge to [bus 21]
pci 0000:1d:02.0: PCI bridge to [bus 23]
pci 0000:1d:02.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:1d:03.0: PCI bridge to [bus 24]
pci 0000:1d:04.0: PCI bridge to [bus 25]
pci 0000:1d:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:1d:06.0: PCI bridge to [bus 26]
pci 0000:1d:06.0: bridge window [io 0xe000-0xefff]
pci 0000:1d:06.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:1d:06.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:1d:07.0: PCI bridge to [bus 27]
pci 0000:03:00.2: PCI bridge to [bus 1d-27]
pci 0000:03:00.2: bridge window [io 0xe000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xfe400000-0xfe5fffff]
pci 0000:03:00.2: bridge window [mem 0xf0200000-0xf05fffff 64bit pref]
pci 0000:00:01.3: PCI bridge to [bus 03-27]
pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe400000-0xfe6fffff]
pci 0000:00:01.3: bridge window [mem 0xf0200000-0xf05fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 28]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 29]
pci 0000:00:07.1: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:00:08.1: PCI bridge to [bus 2a]
pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xefff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe6fffff]
pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf05fffff 64bit pref]
pci_bus 0000:1d: resource 0 [io 0xe000-0xefff]
pci_bus 0000:1d: resource 1 [mem 0xfe400000-0xfe5fffff]
pci_bus 0000:1d: resource 2 [mem 0xf0200000-0xf05fffff 64bit pref]
pci_bus 0000:23: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:25: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
pci_bus 0000:26: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:26: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:28: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:28: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:28: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:29: resource 1 [mem 0xfe100000-0xfe3fffff]
pci_bus 0000:2a: resource 1 [mem 0xfe700000-0xfe7fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:28:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 47148K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd6a86000-0xdaa86000] (64MB) mapped at [ffff925fd6a86000-ffff925fdaa85fff]
perf: AMD NB counters detected
perf: AMD LLC counters detected
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1498728594.292:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffae5c08800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.4-041104-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.4-041104-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:25:00.0: xHCI Host Controller
xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:25:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.4-041104-generic xhci-hcd
usb usb3: SerialNumber: 0000:25:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:25:00.0: xHCI Host Controller
xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.4-041104-generic xhci-hcd
usb usb4: SerialNumber: 0000:25:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:29:00.3: xHCI Host Controller
xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:29:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.11.4-041104-generic xhci-hcd
usb usb5: SerialNumber: 0000:29:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:29:00.3: xHCI Host Controller
xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.11.4-041104-generic xhci-hcd
usb usb6: SerialNumber: 0000:29:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x0800111c
microcode: CPU1: patch_level=0x0800111c
microcode: CPU2: patch_level=0x0800111c
microcode: CPU3: patch_level=0x0800111c
microcode: CPU4: patch_level=0x0800111c
microcode: CPU5: patch_level=0x0800111c
microcode: CPU6: patch_level=0x0800111c
microcode: CPU7: patch_level=0x0800111c
microcode: CPU8: patch_level=0x0800111c
microcode: CPU9: patch_level=0x0800111c
microcode: CPU10: patch_level=0x0800111c
microcode: CPU11: patch_level=0x0800111c
microcode: CPU12: patch_level=0x0800111c
microcode: CPU13: patch_level=0x0800111c
microcode: CPU14: patch_level=0x0800111c
microcode: CPU15: patch_level=0x0800111c
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 58fbdad850c44f62bbdb469745c4ee2480644081'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:60:476
rtc_cmos 00:02: setting system clock to 2017-06-29 09:29:55 UTC (1498728595)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2212K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1144K
Freeing unused kernel memory: 180K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
wmi: Mapper loaded
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
nvme nvme0: pci function 0000:01:00.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
scsi host0: ahci
scsi host1: ahci
PTP clock support registered
dca service started, version 1.12.1
scsi host2: ahci
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680100 irq 297
ata2: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680180 irq 297
ata3: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680200 irq 297
ata4: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680280 irq 297
ata5: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680300 irq 297
ata6: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680380 irq 297
ata7: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680400 irq 297
ata8: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680480 irq 297
ahci 0000:2a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:2a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe708000 port 0xfe708100 irq 301
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=3920
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=16 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TONGA 0x1002:0x6939 0x148C:0x2359 0xF1).
[drm] register mmio base: 0xFE800000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 1022:1453 = 733903/e
[drm] probing mlw for device 1022:1453 = 733903
[drm] VCE enabled in physical mode
[drm] BIOS signature incorrect 0 0
amdgpu 0000:28:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: C76603
[drm] GPU post is not needed
amdgpu 0000:28:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:28:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16437758 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:28:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
[drm] CRT1: INTERNAL_KLDSCP_DAC1
amdgpu 0000:28:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff9266ef1bd008
amdgpu 0000:28:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff9266ef1bd018
amdgpu 0000:28:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff9266ef1bd028
amdgpu 0000:28:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff9266ef1bd038
amdgpu 0000:28:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff9266ef1bd048
amdgpu 0000:28:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff9266ef1bd058
amdgpu 0000:28:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff9266ef1bd068
amdgpu 0000:28:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff9266ef1bd078
amdgpu 0000:28:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff9266ef1bd088
amdgpu 0000:28:00.0: fence driver on ring 9 use gpu addr 0x0000000100000098, cpu addr 0xffff9266ef1bd098
amdgpu 0000:28:00.0: fence driver on ring 10 use gpu addr 0x00000001000000a8, cpu addr 0xffff9266ef1bd0a8
amdgpu 0000:28:00.0: fence driver on ring 11 use gpu addr 0x00000001000000b8, cpu addr 0xffff9266ef1bd0b8
[drm] Found UVD firmware Version: 1.65 Family ID: 10
amdgpu 0000:28:00.0: fence driver on ring 12 use gpu addr 0x0000000000959f40, cpu addr 0xffffae5c0864ef40
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:28:00.0: fence driver on ring 13 use gpu addr 0x00000001000000d8, cpu addr 0xffff9266ef1bd0d8
amdgpu 0000:28:00.0: fence driver on ring 14 use gpu addr 0x00000001000000e8, cpu addr 0xffff9266ef1bd0e8
amdgpu 0000:28:00.0: fence driver on ring 15 use gpu addr 0x00000001000000f8, cpu addr 0xffff9266ef1bd0f8
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
[drm] ring test on 1 succeeded in 7 usecs
[drm] ring test on 2 succeeded in 23 usecs
[drm] ring test on 3 succeeded in 23 usecs
[drm] ring test on 4 succeeded in 8 usecs
[drm] ring test on 5 succeeded in 8 usecs
[drm] ring test on 6 succeeded in 7 usecs
[drm] ring test on 7 succeeded in 9 usecs
[drm] ring test on 8 succeeded in 8 usecs
[drm] ring test on 9 succeeded in 9 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 1-12: new full-speed USB device number 2 using xhci_hcd
pps pps0: new PPS source ptp0
igb 0000:26:00.0: added PHC on eth0
igb 0000:26:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:26:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 60:45:cb:9d:a8:11
igb 0000:26:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:26:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:26:00.0 enp38s0: renamed from eth0
nvme0n1: p1
usb 5-4: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using xhci_hcd
ata9: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 13 succeeded in 16 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] ring test on 15 succeeded in 3 usecs
[drm] VCE initialized successfully.
usb 5-4: New USB device found, idVendor=046d, idProduct=c332
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-4: Product: Gaming Mouse G502
usb 5-4: Manufacturer: Logitech
usb 5-4: SerialNumber: 0788366C3231
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:07.1/0000:29:00.3/usb5/5-4/5-4:1.0/0003:046D:C332.0001/input/input2
hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:29:00.3-4/input0
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:07.1/0000:29:00.3/usb5/5-4/5-4:1.1/0003:046D:C332.0002/input/input3
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 4B0Q PQ: 0 ANSI: 5
hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:29:00.3-4/input1
usb 3-1: New USB device found, idVendor=2109, idProduct=2811
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
usb 3-1: Manufacturer: VIA Labs, Inc.
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 1-12: New USB device found, idVendor=1b1c, idProduct=1c05
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12: Product:
usb 1-12: Manufacturer:
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] fb mappable at 0xE0B63000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: amdgpudrmfb (fb0) is primary device
hid-generic 0003:1B1C:1C05.0003: hiddev0,hidraw2: USB HID v1.11 Device [ ] on usb-0000:03:00.0-12/input0
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2994.374 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b29828a32c, max_idle_ns: 440795270613 ns
Console: switching to colour frame buffer device 320x90
usb 1-13: new full-speed USB device number 3 using xhci_hcd
amdgpu 0000:28:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] Initialized amdgpu 3.10.0 20150101 for 0000:28:00.0 on minor 0
usb 4-1: New USB device found, idVendor=2109, idProduct=8110
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.0 Hub
usb 4-1: Manufacturer: VIA Labs, Inc.
ata2: SATA link down (SStatus 0 SControl 300)
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
random: fast init done
usb 3-2: new full-speed USB device number 3 using xhci_hcd
usb 1-13: New USB device found, idVendor=1b1c, idProduct=0c09
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-13: Product: H100i v2
usb 1-13: Manufacturer: Corsair Components, Inc.
usb 1-13: SerialNumber: 7289_2.0
ata3: SATA link down (SStatus 0 SControl 300)
usb 3-2: New USB device found, idVendor=2516, idProduct=003b
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: MasterKeys Pro L
usb 3-2: Manufacturer: Cooler Master Technology Inc.
input: Cooler Master Technology Inc. MasterKeys Pro L as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:25:00.0/usb3/3-2/3-2:1.0/0003:2516:003B.0004/input/input4
hid-generic 0003:2516:003B.0004: input,hidraw3: USB HID v1.11 Keyboard [Cooler Master Technology Inc. MasterKeys Pro L] on usb-0000:25:00.0-2/input0
hid-generic 0003:2516:003B.0005: hiddev0,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. MasterKeys Pro L] on usb-0000:25:00.0-2/input1
input: Cooler Master Technology Inc. MasterKeys Pro L as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:25:00.0/usb3/3-2/3-2:1.2/0003:2516:003B.0006/input/input5
hid-generic 0003:2516:003B.0006: input,hidraw5: USB HID v1.11 Keyboard [Cooler Master Technology Inc. MasterKeys Pro L] on usb-0000:25:00.0-2/input2
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 1B01 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
clocksource: Switched to clocksource tsc
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ 0-10 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI disk
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.15: Port Multiplier 1.2, 0x197b:0x0325 r0, 15 ports, feat 0x5/0xf
ata7.00: hard resetting link
ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata7.01: hard resetting link
ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata7.02: hard resetting link
ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata7.03: hard resetting link
ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata7.04: hard resetting link
ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata7.05: hard resetting link
ata7.05: failed to resume link (SControl 0)
ata7.05: SATA link down (SStatus 0 SControl 0)
ata7.06: hard resetting link
ata7.06: failed to resume link (SControl 0)
ata7.06: SATA link down (SStatus 0 SControl 0)
ata7.07: hard resetting link
ata7.07: failed to resume link (SControl 0)
ata7.07: SATA link down (SStatus 0 SControl 0)
ata7.08: hard resetting link
ata7.08: failed to resume link (SControl 0)
ata7.08: SATA link down (SStatus 0 SControl 0)
ata7.09: hard resetting link
ata7.09: failed to resume link (SControl 0)
ata7.09: SATA link down (SStatus 0 SControl 0)
ata7.10: hard resetting link
ata7.10: failed to resume link (SControl 0)
ata7.10: SATA link down (SStatus 0 SControl 0)
ata7.11: hard resetting link
ata7.11: failed to resume link (SControl 0)
ata7.11: SATA link down (SStatus 0 SControl 0)
ata7.12: hard resetting link
ata7.12: failed to resume link (SControl 0)
ata7.12: SATA link down (SStatus 0 SControl 0)
ata7.13: hard resetting link
ata7.13: failed to resume link (SControl 0)
ata7.13: SATA link down (SStatus 0 SControl 0)
ata7.14: hard resetting link
ata7.14: failed to resume link (SControl 0)
ata7.14: SATA link down (SStatus 0 SControl 0)
ata7.00: ATA-8: ST500LM021-1KJ152, 0004LIM1, max UDMA/133
ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
ata7.01: ATA-8: ST500LM021-1KJ152, 0004LIM1, max UDMA/133
ata7.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.01: configured for UDMA/133
ata7.02: ATA-8: ST500LM021-1KJ152, 0004LIM1, max UDMA/133
ata7.02: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.02: configured for UDMA/133
ata7.03: ATA-8: ST500LM021-1KJ152, 0004LIM1, max UDMA/133
ata7.03: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.03: configured for UDMA/133
ata7.04: ATA-8: ST500LM021-1KJ152, 0004LIM1, max UDMA/133
ata7.04: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.04: configured for UDMA/133
ata7: EH complete
scsi 6:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 6:0:0:0: [sdd] 4096-byte physical blocks
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:1:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
sd 6:1:0:0: Attached scsi generic sg4 type 0
sd 6:1:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 6:1:0:0: [sde] 4096-byte physical blocks
sd 6:1:0:0: [sde] Write Protect is off
sd 6:1:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:2:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] Attached SCSI disk
sd 6:1:0:0: [sde] Attached SCSI disk
sd 6:2:0:0: Attached scsi generic sg5 type 0
sd 6:2:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 6:2:0:0: [sdf] 4096-byte physical blocks
sd 6:2:0:0: [sdf] Write Protect is off
sd 6:2:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 6:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:3:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
sd 6:3:0:0: Attached scsi generic sg6 type 0
sd 6:3:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 6:3:0:0: [sdg] 4096-byte physical blocks
sd 6:3:0:0: [sdg] Write Protect is off
scsi 6:4:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
sd 6:3:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:3:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:2:0:0: [sdf] Attached SCSI disk
sd 6:3:0:0: [sdg] Attached SCSI disk
sd 6:4:0:0: Attached scsi generic sg7 type 0
sd 6:4:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 6:4:0:0: [sdh] 4096-byte physical blocks
sd 6:4:0:0: [sdh] Write Protect is off
sd 6:4:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 6:4:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:4:0:0: [sdh] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
random: crng init done
md/raid10:md127: active with 4 out of 4 devices
md127: detected capacity change from 0 to 999947239424
raid6: sse2x1 gen() 7016 MB/s
raid6: sse2x1 xor() 7128 MB/s
raid6: sse2x2 gen() 15046 MB/s
raid6: sse2x2 xor() 9924 MB/s
raid6: sse2x4 gen() 15883 MB/s
raid6: sse2x4 xor() 9092 MB/s
raid6: avx2x1 gen() 16035 MB/s
raid6: avx2x1 xor() 12625 MB/s
raid6: avx2x2 gen() 20855 MB/s
raid6: avx2x2 xor() 13493 MB/s
raid6: avx2x4 gen() 21740 MB/s
raid6: avx2x4 xor() 12556 MB/s
raid6: using algorithm avx2x4 gen() 21740 MB/s
raid6: .... xor() 12556 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Syslog Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p1): re-mounted. Opts: errors=remount-ro
systemd-journald[551]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swap-space. Priority:-1 extents:13 across:5111804k SSFS
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
ccp 0000:29:00.2: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:28:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:28:00.1: Force to non-snoop mode
snd_hda_intel 0000:28:00.1: Applying patch firmware 'hda-jack-retask.fw'
snd_hda_intel 0000:2a:00.3: Applying patch firmware 'hda-jack-retask.fw'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input11
snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_generic hdaudioC1D0: inputs:
snd_hda_codec_generic hdaudioC1D0: Front Mic=0x19
snd_hda_codec_generic hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_generic hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input13
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input14
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input15
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input16
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input17
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input18
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19
asus_wmi: Number of fans: 1
audit: type=1400 audit(1498728616.403:2): apparmor="STATUS" operation="profile_load" name="docker-default" pid=1241 comm="apparmor_parser"
audit: type=1400 audit(1498728616.403:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=1252 comm="apparmor_parser"
audit: type=1400 audit(1498728616.403:4): apparmor="STATUS" operation="profile_load" name="/usr/bin/lxc-start" pid=1245 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=1249 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1249 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/ipsec/stroke" pid=1247 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lxd/lxd-bridge-proxy" pid=1248 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1254 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=1250 comm="apparmor_parser"
audit: type=1400 audit(1498728616.407:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/ipsec/charon" pid=1246 comm="apparmor_parser"
new mount options do not match the existing superblock, will be ignored
ip_tables: (C) 2000-2006 Netfilter Core Team
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp38s0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_UP): enp38s0: link is not ready
Bridge firewalling registered
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
igb 0000:26:00.0 enp38s0: igb: enp38s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp38s0: link becomes ready
NET: Registered protocol family 15
NET: Registered protocol family 24
l2tp_core: L2TP core driver, V2.0
l2tp_netlink: L2TP netlink interface
l2tp_ppp: PPPoL2TP kernel driver, V2.0
kauditd_printk_skb: 12 callbacks suppressed
audit: type=1400 audit(1498728625.086:24): apparmor="STATUS" operation="profile_load" name="lxd-webgrabplus_" pid=3179 comm="apparmor_parser"
lxdbr0: port 1(vethEQXA8E) entered blocking state
lxdbr0: port 1(vethEQXA8E) entered disabled state
device vethEQXA8E entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethEQXA8E: link is not ready
eth0: renamed from vethMVHLYU
IPv6: ADDRCONF(NETDEV_CHANGE): vethEQXA8E: link becomes ready
lxdbr0: port 1(vethEQXA8E) entered blocking state
lxdbr0: port 1(vethEQXA8E) entered forwarding state
Loading iSCSI transport class v2.0-870.
EXT4-fs (md127): recovery complete
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)